INSTEK PSM-6003 CALIBRATION and INSTEK PSM-6003 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK PSM-6003 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   INSTEK PSM-6003   Description / Specification:    
INSTEK PSM-6003 30V 6A / 60V 3.3A Single Output Dual Range DC Power Supply

The GW Instek PSM-6003 is a Single output / dual range programmable linear DC power supply. OVP, OCP, OTP, and, output On/Off control protect the PSM-6003 and it's load from unexpected conditions. High resolution, high regulation, and low ripple are maintained at 1 mV/1 mA, 0.01%, and <350 Vrms, respectively. Operation and configuration is simplified with a digital interface and a clear LCD display. Standard features include store/recall output memories, automatic stepping with timers for continuous testing and self-testing, and software calibration features to reduce maintenance efforts. SCPI programming, LabVIEW drivers, RS-232C, and GPIB interfaces enable easy automated test system integration and remote control. Specifications. Output Low Range: 0 to 30 V / 6 A. Output High Range: 0 to 60 V / 3.3 A. Constant Voltage (CV) Operation Regulation + (% of output + offset): Load regulation <= 0.01% + 2 mV, Line regulation <= 0.01% + 2 mV. CV Ripple & Noise: <= 50 V 500 µVrms/3 mVpp, > 50 V < 1mVrms/3mVpp. Constant Current (CC) Operation Regulation + (% of output + offset): Load regulation <= 0.01% + 250 µA, Line regulation <= 0.01% + 250 µA. CC Ripple & Noise: < 2 mArms. Programming Voltage Resolution: 2 mV. Programming Current Resolution: 0.5 mA.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK PSM-6003. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your INSTEK PSM-6003 CALIBRATION and/or INSTEK PSM-6003 30V 6A / 60V 3.3A Single Output Dual Range DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: